Re-Volt LEGO® models

[kiwi]

At the beginning of last year I tried to rebuild some of the Re-Volt cars with my old LEGO® bricks. Now, one year later, I decided to create building instructions for this models, so you also can do them. It's the perfect decoration object for every real Re-Volter!

Today I want to begin with RC Bandit. The model is built out of 80 LEGO® parts.

Download Instruction manual (PDF, 621 kb)

Needed LEGO® parts:

1x 2341 – Slope Brick 45 3 x 1 Inverted Double, Black
2x 2420 – Plate 2 x 2 Corner, Yellow
2 2420 – Plate 2 x 2 Corner, Red
1x 2445 – Plate 2 x 12, Black
1x 2540 – Plate 1 x 2 with Handle, Black
1x 2569 – Antenna 8H Whip, Black
1x 3004 – Brick 1 x 2, Black
1x 3004 – Brick 1 x 2, Red
2x 3020 – Plate 2 x 4, White
1x 3020 – Plate 2 x 4, Red
1x 3020 – Plate 2 x 4, Yellow
3x 3023 – Plate 1 x 2, Black
1x 3062b – Brick 1 x 1 Round with Hollow Stud, Red
1x 3068b – Tile 2 x 2 with Groove, White
1x 3068b – Tile 2 x 2 with Groove, Red
1x 3069b – Tile 1 x 2 with Groove, White
1x 3069b – Tile 1 x 2 with Groove, Yellow
2x 3070b – Tile 1 x 1 with Groove, White
2x 3070b – Tile 1 x 1 with Groove, Yellow
1x 3298 – Slope Brick 33 3 x 2, Black
1x 3298 – Slope Brick 33 3 x 2, Red
8x 3482 – Wheel Rim 8 x 17.5 with Axlehole, Yellow
8x 3483 – Tyre 7/ 56 x 17 Offset Tread
2x 3665a – Slope Brick 45 2 x 1 Inverted, Black
4x 3700 – Technic Brick 1 x 2 with Hole, Black
2x 3707 – Technic Axle 8, Black
2x 3710 – Plate 1 x 4, Black
4x 3713 – Technic Bush with Two Flanges, Light Gray
1x 3794b – Plate 1 x 2 with Groove with 1 Centre Stud, White
3x 3794b – Plate 1 x 2 with Groove with 1 Centre Stud, Black
1x 3795 – Plate 2 x 6, Black
4x 4265a – Technic Bush 1/2 Type 1, Light Gray
4x 4592 – Hinge Control Stick Base, Black
1x 4859 – Wing 3 x 4 with 1 x 2 Cutout without Stud Notches, White
2x 4865a – Panel 1 x 2 x 1 with Square Corners, White
2x 4865a – Panel 1 x 2 x 1 with Square Corners, Red
4x 6141 – Plate 1 x 1 Round, Black

This is how the model looks like:



If you have rebuilt the car, maybe you want to show it here? Or maybe you have done a different car?

Have fun!

[kiwi]

Today we are building Col. Moss out of LEGO® bricks! I made the model out of 78 parts.

Download Instruction manual (PDF, 573 kb)

Needed LEGO® parts:

4x 2412a – Tile 1 x 2 Grille without Groove, Green
1x 2431 – Tile 1 x 4 with Groove, Red
1x 2569 – Antenna 8H Whip, Light Grey
2x 3005 – Brick 1 x 1, Green
2x 3009 – Brick 1 x 6, Green
2x 3010 – Brick 1 x 4, Green
2x 3020 – Plate 2 x 4, Green
1x 3022 – Plate 2 x 2, Black
1x 3023 – Plate 1 x 2, Black
2x 3023 – Plate 1 x 2, Light Grey
3x 3023 – Plate 1 x 2, Green
2x 3024 – Plate 1 x 1, Black
2x 3024 – Plate 1 x 1, Light Grey
1x 3032 – Plate 4 x 6, Black
4x 3040b – Slope Brick 45 2 x 1, Green
1x 3062b – Brick 1 x 1 Round with Hollow Stud, Red
1x 3068b – Tile 2 x 2 with Groove, Light Yellow
4x 3069b – Tile 1 x 2 with Groove, Black
2x 3070b – Tile 1 x 1 with Groove, Red
2x 3070b – Tile 1 x 1 with Groove, Light Grey
1x 3460 – Plate 1 x 8, Black
5x 3460 – Plate 1 x 8, Green
1x 3623 – Plate 1 x 3, Light Grey
2x 3623 – Plate 1 x 3, Black
1x 3665a – Slope Brick 45 2 x 1 Inverted, Black
4x 3665a – Slope Brick 45 2 x 1 Inverted, Light Grey
1x 3666 – Plate 1 x 6, Black
3x 3710 – Plate 1 x 4, Green
2x 3794b – Plate 1 x 2 with Groove with 1 Centre Stud, Black
2x 4081b – Plate 1 x 1 with Clip Light Type 2, Black
3x 4081b – Plate 1 x 1 with Clip Light Type 2, Light Grey
1x 4085c – Plate 1 x 1 with Clip Vertical (Thick U-Clip), Black
4x 6014c01 – Wheel Rim 11.2 x 10.4 with Tyre 12/ 40 x 11 Wide, Light Grey
2x 6141 – Plate 1 x 1 Round, Yellow
2x 6141 – Plate 1 x 1 Round, Trans Clear
2x 6141 – Plate 1 x 1 Round, Light Grey
2x 6157 – Plate 2 x 2 with 2 Wheel Pins Extended without Wishbones, Black

This is how the model looks like:

[607]

Very impressive!
I'm also impressed by your parts. Having 4 of those 'raster' (I've no idea of the name) pieces in green? Very nice though, it looks a lot better than it would as a pc screenshot.

[kiwi]

I have quite a lot of green parts, because I grew up in the early 90's, and a lot of models with the fictional Octan-brand (green, red, white) came out at this time.

[607]

I have quite a lot of green parts, because I grew up in the early 90's, and a lot of models with the fictional Octan-brand (green, red, white) came out at this time.

Ah, right! The icon for Lego Racers' turbo.

[Pyves]

I like the Col. Moss model a lot, you can instantly recognise it!

[idkwhattotype]

Sorry for the bump, but is this project still being worked on?

[kiwi]

This was never meant as a project with a plan, but yeah...I made Dr. Grudge and Rotor back then as well. I was not satisfied with the result, so I didn't posted them. But I guess as you are asking now, I can post them anyway. However, there are no instruction manuals nor a detailed brick list available for them.

[idkwhattotype]

They look awesome! I don't know why you scrapped those two.

[607]

Dr. Grudge and Rotor look great too, thanks for sharing them!

[EREN]

Are you going to make a tutoriel video about that

[kiwi]

For RC-Bandit and Col. Moss I provided both an instruction manual to download, as well a detailed list of needed parts. By combining both you should be able to rebuild the models without needing a video tutorial.